Mais informações
Do not plug in your adapter to the computer running Windows Vista. Follow the steps below to install the software.
1. Download the software package from your product’s support website
2. Unzip the package if necessary
3. Double-click on the ‘setup’ application
4. You may see a window titled, “A program needs your permission to continue”. Click ‘Continue’
5. Click ‘Install’ to begin the installation process
6. You may see a window titled, “Windows can’t verify the publisher of this driver software”. This is normal and does not indicate a problem. Our software has been fully tested and is compatible with this operating system.
7. When prompted, plug in your adapter.
8. When the installation completes, click on ‘Finish’. Your installation is now complete. (Insert screen shot)
9. To connect to the Internet, open the Network and Sharing Center by first opening the Control Panel from the Start menu.
10. In the Control Panel, click on “View network status and tasks” (Insert screen shot)
11. In the Network and Sharing Center, click on “Connect to a network” (Insert screen shot)
12. Select an available wireless network and click ‘Connect’
13. Your card will attempt to connect to the selected network.
14. Depending on the security settings of your wireless network, you may be prompted to enter in a network security key or a passphrase. Click ‘Connect’ after you have done so.
15. After connecting to the network, you may choose to save this network and connect automatically once your adapter is in range.
16. The Network and Sharing Center should now show the network connection that you have just made. The links on the left of the window allow you to configure your network connections.