Networking >


 
Your Wireless Print Server is equipped with a DHCP client that will automatically get IP addresses from a DHCP server. The factory default settings for the DHCP client will work in most cases, whenever a DHCP server is existed in the network. If you need to make changes to the settings, you can do so.

The changes that you can make are:

- Enable/Disable the DHCP Client Function. Default = ON (Enabled)

- Specify the IP address of the Router.
- Specify the Subnet Mask.
- Specify the Gateway IP Address.

To make changes, click "IP Address" on the LAN tab to the left.